[. . . ] In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this unit's DVD features should not be used. This unit is for vehicles with a 12-volt battery and negative grounding. [. . . ] When connecting this product to another product, refer to the supplied manuals of both products and connect cords that have the same function. IP-BUS cable Black IP-BUS cable (supplied with TV tuner) Blue Multi-CD player (sold separately) Fuse holder Yellow To terminal always supplied with power regardless of ignition switch position. Yellow (2*) To terminal always supplied with power regardless of ignition switch position. Blue/white (6*) ISO connector Note: In some vehicles, the ISO connector may be divided into two. Speaker leads White: Front left + White/black: Front left Gray: Front right + Gray/black: Front right Green: Rear left + Green/black: Rear left Violet: Rear right + Violet/black: Rear right See the section "When connecting with a rear view camera". Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. This lead must be connected to the power supply side of the parking brake switch. When connecting to separately sold power amp Perform these connections when using the optional amplifier. When connecting with a rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera when the gear shift is moved to REVERSE (R) position is possible. The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. The object in rear view may appear closer or more distant than in reality. Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. Violet/white Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. It is necessary to set to BACK UP CAMERA in SETUP when connecting the rear view camera. It is necessary to set to AV INPUT in SETUP when connecting the external video component. This product's rear video output is for connection of a display to enable passengers in the rear seats to watch the DVD or Video CD. NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while Driving. NEVER connect rear audio output (REAR OUT) to sold separately power amp. [. . . ] Select a position where the screw holes of the bracket and the screw holes of this product become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of binding screws (4 × 3 mm), binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the screw holes in the bracket. In this case, stick conceal tape on parts that protrude from the dashboard. [. . . ]